Laser Interceptor 2

The Laser Interceptor is the best laser protection system for your vehicle. It's a multipurpose laser sensor device with several features. The main feature being a parking sensor designed to assist the driver when parking a vehicle and help him avoid unpleasant and costly close contacts.

Also, this device will allow you to open an electric garage door (with use of suitable additional items) and even use it as light activator.

For all that it's using both visual and audible warnigs(beeps and real human voice).

The Laser Interceptor is based on advanced quad receiver and dual LASER transmitter technology using military standards. The power of this product is over 100 times greater than other units on the market that use LED diodes. The quad receiver combined with it's unique optical amplifiers ensures the highest possible performance.

The Laser Interceptor CPU box is equipped with 4 ports so it can gets up to 4 heads. The Laser Interceptor 2 has two outer sensors (heads) and it's suitable for frontal protection on cars or front and rear protection on motorbikes. If you want a full protection for your vehicle you can get Laser Interceptor 4.

The CPU box is also equipped with RS232C serial port for communication with Windows PC. Using provided software user can set up various options in this device or gets the latest updates.

Inside of the package you will find:

• 2 sensors
• CPU box with built in 90 db speaker for audio alerts, RS-232 connector for user changes via the LI user's software and update firmware via internet
• Power switch with built in LED indicator for ON/OFF and flashes upon action
• Function switch to change the mode of your LI anytime you wish(from normal behaviour to permanent parking mode)
• Installation accessories, mounting hardware, brackets, key-chain sensor installation bubble-level, zip-ties
• English User Manual

Installation

The installation it's very easy on most of the vehicles. Please take special care while installing the sensors. If you are not sure that you can do a good and clean installation we recommend installation in eqquipped and experienced workshop. We can send you photos of previous installations after you buy the product to help you if you are planning to install it by yourself.

The standard Laser Interceptor is a dual head laser kit. Extra head(s) are also available for rear protection. The following installation describes the Laser Interceptor 2:
 
The two laser transceivers are mounted on the front of the vehicle, normally within the front grill, 40cm to 70cm apart. If you are planning to install it on a bike you should put one head on front and the other on rear. As natural sunlight emits a broad range of frequencies (including 908nm) the transceivers should preferably be shielded from sunlight as much as practical. Direct sunlight on the transceiver heads can sometimes interfere with their performance. The units must be mounted parallel to the road.

Specifications

    Laser Sensor Wavelength : 904nm
    Laser Class : 1M
    Power : 12-15v
    CPU Box Current : 70mA (Max 700mA)
    Outer Sensors : 30mA
    Operating Temperature : -30 to +70 C
    Dimensions (CPU Box) : 125 x 55 x 25mm
    New sensor(2010) : 80mm x 24mm x15mm
    PSOS Connector Wires Length : 1m
    Sensor Wires Length : 5.5m
    Function Switch Wires Length: 1m